Call Us Toll Free (888) 2-VOLGEN
SEARCH:

VHV --- 2 - 2.6 WATT

The VHV series is an ultra small size, adjustable output, high voltage DC/DC converter.

FEATURES

  • PCB MOUNTABLE
  • 2 TO 2.6W OUTPUT
  • LOW RIPPLE NOISE 
  • REMOTE ON/OFF CONTROL
  • 5 SIDED METALLIC SHIELDING
  • RoHS COMPLIANT
  • ADJUSTABLE OUTPUT VOLTAGE
  • HIGH RELIABILITY
   
Model Input
Range
Output
Voltage

Output
Current
(Min / Full)

Load
Resistance
Input
Current
Ripple
&
Noise
VHV12-470S06P 10.8 - 13.2VDC +470VDC 0A / 5.6mA 83.3KΩ 390mA 40mVp-p
VHV12-470S06N 10.8 - 13.2VDC -470VDC 0A / 5.6mA 83.3KΩ 390mA 40mVp-p
VHV12-1.0K2000P 10.8 - 16.5VDC +1000VDC 0A / 2mA 500KΩ 280mA 30mVp-p
VHV12-1.0K2000N 10.8 - 16.5VDC -1000VDC 0A / 2mA 500KΩ 280mA 30mVp-p
VHV12-1.5K1300P 10.8 - 16.5VDC +1500VDC 0A / 1.3mA 1150KΩ 290mA  30mVp-p
VHV12-1.5K1300N 10.8 - 16.5VDC -1500VDC 0A / 1.3mA 1150KΩ 290mA  30mVp-p
VHV12-2.0K1000P 10.8 - 16.5VDC +2000VDC 0A / 1mA 2000KΩ 340mA 50mVp-p
VHV12-2.0K1000N 10.8 - 16.5VDC -2000VDC 0A / 1mA 2000KΩ 340mA 50mVp-p
VHV --- 2 - 2.6 WATT

Electrical Specifications

All specifications are typical at nominal input, full load

Input Specifications

Input Voltage RangeSee Above
Input Regulation0.03% typical
Input CurrentSee Above

Output Specifications

Output Powerup to 2.6 Watts max
Voltage Accuracy< ±5%
Minimum LoadNone
Load Regulation470V: 0.08% typical
All other: 0.03% typical
Output Voltage ControlExternal voltage is 0V to +4V, or an adjustable resister with 5KΩ
Ripple and Noise50mVp-p max
Over Current Protection105%; Autostart, Hold back characteristic
On/Off ControlIf pin 2 to 5 is open = ON
When 2 to 5 is short = OFF

General Specifications

Input/Output IsolationNon-Isolated
(pin 2 - pin 6 and case are internally connected)
MTBF390,000 to 400,000 Hours min.

Environmental Specifications

Operating Temperature-10ºC ~ +60ºC (with derating)
Storage Temperature-25ºC ~ +85ºC
Temperature Regulation±0.01% / ºC typical
Relative Humidity20% ~ 95% Rh (Non Condensing)

Physical Specification

Case MaterialsNickel-Coated Brass
Pin MaterialsPhosphorous bronze with Ni base AU coating.
Dimensions110.0 x 12.0 x 19.75 mm (L x W x H)
Excluding pins


NOTES

Weight: 65g typical
Units: mm
Tolerance: ±5% unless otherwise specified