Call Us Toll Free (888) 2-VOLGEN
SEARCH:

SBU120 --- 120 Watt

SBU120 is a 120 WATT, Universal Input, Single, Dual, and Triple output, 3 x 5 Open Frame Switching Power Supply

Features

  • 120 WATT OUTPUT POWER
  • UNIVERSAL INPUT (90 - 264VAC)
  • SINGLE, DUAL, TRIPLE OUTPUT
  • OVER VOLTAGE PROTECTION
  • OVER CURRENT PROTECTION
  • INPUT SURGE CURRENT PROTECTION
  • POWER FACTOR CORRECTION
  • CLASS I INSULATION
  • 3 X 5 OPEN FRAME
Model Output #1 Output #2 Output #3
Max
power
SBU120-101 3 - 5V @ 22.00 - 20.00A     100W
SBU120-102 5 - 6V @ 22.00 - 18.33A     110W 
SBU120-103 6 - 9V @ 19.16 - 12.77A     115W
SBU120-104 9 - 11V @ 13.33 - 10.90A     120W
SBU120-105 11 - 13V @ 10.90 - 9.23A     120W
SBU120-106 13 - 16V @ 9.23 - 7.50A     120W
SBU120-107 16 - 21V @ 7.50 - 5.71A     120W
SBU120-108 21 - 27V @ 5.71 - 4.44A     120W
SBU120-109 27 - 33V @ 4.44 - 3.63A     120W
SBU120-110 33 - 40V @ 3.63 - 3.00A     120W
SBU120-111 40 - 50V @ 3.00 - 2.40A     120W
         
Model Output #1 Output #2 Output #3 Max
Power
SBU120-200 +3.3V @ 15A +12V @ 6A   120W
SBU120-201 +5V @ 15A +12V @ 6A   120W
SBU120-202 +5V @ 15A +15V @ 6A   120W
SBU120-203 +5V @ 15A +24V @ 3.5A   120W
SBU120-204 +3.3V @ 15A +5V @ 6A   79.5W
SBU120-215 +5V @ 15A -24V@ 2A   120W
SBU120-219 +28V @ 3.92A +5V @ 2A   120W
         
Model Output #1 Output #2 Output #3

Max
Power

SBU120-300 +3.3V @ 15A +12V @ 6A -12V @ 0.8A 120W
SBU120-300-1 +3.3V @ 15A +12V @ 6A +12V @ 0.8A 120W
SBU120-301 +5V @ 15A +12V @ 6A -5V @ 0.8A 120W
SBU120-301-1 +5V @ 15A +12V @ 6A +5V @ 0.8A 120W
SBU120-302 +5V @ 15A +12V @ 6A -12V @ 0.8A 120W
SBU120-302-1 +5V @ 15A +12V @ 6A +12V @ 0.8A 120W
SBU120-303 +5V @ 15A +15V @ 6A -15V @ 0.8A 120W
SBU120-303-1 +5V @ 15A +15V @ 6A +15V @ 0.8A 120W
SBU120-304 +5V @ 15A +24V @ 3.5A -24V @ 0.8A 120W
SBU120-304-1 +5V @ 15A +24V @ 3.5A +24V @ 0.8A 120W
SBU120-305 +5V @ 15A +24V @ 3.5A -12V @ 0.8A 120W
SBU120-305-1 +5V @ 15A +24V @ 3.5A +12V @ 0.8A 120W
SBU120-306 +3.3V @ 15A +12V @ 6A -5V @ 0.8A 120W
SBU120-306-1 +3.3V @ 15A +12V @ 6A +5V @ 0.8A 120W
SBU120-307 +5V @ 15A +10V @ 6A -10V @ 1A 120W
SBU120-307-1 +5V @ 15A +10V @ 6A +10V @ 1A 120W
SBU120-308 +3.3V @ 15A +5V @ 6A -12V @ 1A 91.5W
SBU120-308-1 +3.3V @ 15A +5V @ 6A +12V @ 1A 91.5W
SBU120 --- 120 Watt

Electrical Specifications

All specifications are typical at nominal input, full load

Input Specifications

Input Voltage90 ~ 264VAC
Input Frequency47 ~ 63Hz
Input Current(Low Line)1.7A
Input Current(High Line)1.0A
Inrush Current(Low line)12A (typ), 15A(max)

Output Specifications

Output VoltageSee Above
Efficiency70 ~ 88%
Over-Voltage Protection112 ~ 132%
Over-Current Protection110 ~ 150%
Ripple and Noise1 ~ 2% Peak to Peak
Hold-Up Time16 ~ 20 mS
Line Regulation0.5 ~ 1% max
Load Regulation3 ~ 5% max
Leakage Current0.4 ~ 0.45%
Transient Response4mS max
Start-Up Time0.3 ~ 2 Sec max

General Specifications

Dielectric Withstanding Voltage
Primary to Secondary4242VDC
Primary to Ground2121VDC
Isolation Resistance50 M-Ohms min.

Environmental Specifications

Operating Temperature0°C ~ +70°C
(Derates linearly 2.5% / °C after 50°C)
Storage Temperature-40°C ~ +85°C
CoolingConvection
Temperature Coefficient0.04% / °C
Humidity5 ~ 95%Rh

Physical Specifications

Physical SpecificationsOpen Frame 3 x 5 Inches
Dimensions127.0 x 76.2 x 32.6 mm (L x W x H)

Safeties/Approvals

Safeties/ApprovalsUL/cUL
CE
CB


NOTES

1) Dimensions are shown in inches[mm] value
2) Weight: 330 - 380gs approx.
3) Input connector mates with Molex housing 09-50-3051 and Molex 2878 series crimp terminal.
4) Output connector mates with Molex housing 09-50-3061(or 09-50-3081, 09-50-3131) and Molex 2878 series crimp terminal.



NOTES

Single Output Pin Assignment



NOTES

Multiple Output Pin Assignment