|
|
MT5A Series is a 5 WATT, DC/DC converter with 2:1 Input Voltage Range
FEATURES
- 5 WATT REGULATED OUTPUT POWER
- 2:1 AND 4:1(W) INPUT VOLTAGE RANGE
- SINGLE & DUAL OUTPUT AVAILABLE
- STANDARD 24PIN DIP PACKAGE
- 1.25 X 0.8 X 0.4 INCH PACKAGE
|
- OPTIONAL EXTENTED TEMPERATURE RANGE AVAILABLE
(M1 & M2 OPTION)
- RoHS COMPLIANT
- HIGH EFFICIENCY UP TO 80%
- SMD PACKAGE AVAILABLE
|
| Model |
Input
Range |
Output
Voltage |
Output Current
|
Input
Current
|
Efficiency |
| MT5A-1233SI |
9 - 18VDC |
3.3VDC |
1000mA |
382mA |
76% |
| MT5A-1205SI |
9 - 18VDC |
5VDC |
1000mA |
563mA |
78% |
| MT5A-1212SI |
9 - 18VDC |
12VDC |
470mA |
603mA |
82% |
| MT5A-1215SI |
9 - 18VDC |
15VDC |
400mA |
649mA |
81% |
| MT5A-1205WI |
9 - 18VDC |
±5VDC |
±500mA |
563mA |
78% |
| MT5A-1212WI |
9 - 18VDC |
±12VDC |
±230mA |
597mA |
81% |
| MT5A-1215WI |
9 - 18VDC |
±15VDC |
±190mA |
594mA |
84% |
| MT5A-2433SI |
9 - 18VDC |
3.3VDC |
1000mA |
194mA |
77% |
| MT5A-2405SI |
9 - 18VDC |
5VDC |
1000mA |
285mA |
77% |
| MT5A-2412SI |
9 - 18VDC |
12VDC |
470mA |
305mA |
81% |
| MT5A-2415SI |
18 - 36VDC |
3.3VDC |
60mA / 600mA |
128mA |
68% |
| MT3A-2405SI |
18 - 36VDC |
5VDC |
60mA / 600mA |
178mA |
74% |
| MT3A-2412SI |
18 - 36VDC |
12VDC |
25mA / 250mA |
171mA |
77% |
| MT3A-2412WI |
18 - 36VDC |
±12VDC |
±12mA / ±125mA |
171mA |
77% |
| MT3A-2415WI |
18 - 36VDC |
±15VDC |
±10mA / ±100mA |
171mA |
77% |
|
 
|
Electrical SpecificationsAll specifications are typical at nominal input, full load Input Specifications| Input Voltage Range | See Above | | Input Filter | Pi Type | | Input Surge Voltage
100mS max | 12V input - 36 VDC
24V input - 50 VDC
48V input - 100 VDC
48V input - 100 VDC | | Input Reflected Ripple | 20mAp-p | | Start up Time | 450mS max (Power Up) |
Output Specifications| Output Power | 5 Watts max | | Voltage Accuracy | ±1% | | Minimum Load | 10% of Full Load | | Line Regulation | ±0.2% | | Load Regulation | Single Output: ±0.5%
Dual Output: ±1% | | Cross Regulation(Dual) | ±5% | | Ripple and Noise | 50mVp-p max | | Transient Response Recovery Time | 200µS | | Over Load Protection | 170% typ. | | Short Circuit Protection | Automatic Recovery |
| General Specifications| Isolation Voltage | 1600VDC min | | Isolation resistance | 1G Ohms min | | Isolation Capacitance | 300pF max | | Switching Frequency | 300KHz typ. |
Environmental Specifications| Operating Temperature | -25ºC ~ +85ºC (with derating)
M1: -40ºC ~ +85ºC(non-derating)
M2: -25ºC ~ +85ºC(with Derating) | | Storage Temperature | -55ºC ~ +105ºC | | Max Case Temperature | 100ºC | | Temperature Coefficient | ±0.02% / ºC max | | Thermal Shock / Vibration | MIL-STD-810F | | Relative Humidity | 5% ~ 95% Rh |
Physical Specification| Case Materials | Nickel-Coated Copper | | Base Materials | Non-Conductive Black Plastic | | Potting Materials | Epoxy (UL94-V0) | | Dimensions | 1.25 x 0.8 x 0.4 inch (L x W x H) |
EMC Characteristics
|
|
|
